Even more robust and ready for adventure - but still removable: with the introduction of the first removable carrier for motorcycle cases, we've made our mark on the accessories market, the PRO side carrier is the new generation. Offroad fans will be impressed. The bike-specific PRO side carrier made of 2.5 mm-thick steel is extremely durable. The PRO side carrier offers side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser and Shad as well as the Sysbag 15 and Sysbag 30 a secure fit - the matching adapter kits are sold separately. The PRO side carrier's numerous functional drill holes enable the mounting of RotopaX, Kriega OS-Platform  canisters and other accessories.We continue to use our trusted and popular QUICK-LOCK fasteners, which were also revised during redevelopment. As usual, the quick-release fasteners can be loosened by a quarter turn with a flat-head screwdriver or our multitool. The carrier can be removed completely in no time and all that remains on the bike are unimposing attachments. For permanently mounting the PRO side carrier on your bike, we now offer a redesigned quick-release fastener. A special mounting kit is no longer required, but the PRO side carrier can now be screwed tightly with cheaper, standard parts (M8). An appropriate screw kit (M8) is available separately from us.    Extremely durable due to its optimized shape and 2.5 mm thick steel    Perfect fit, designed to fit close to the bike    Fully removable with newly developed, even more robust quick-release fasteners    Optional anti-theft protection available    For permanent mounting, quick-release fasteners can be replaced with standard parts (M8)    Numerous functional bores, compatible with the RotopaX system among others    Simple mounting on original mounting points    Powerful corrosion protection thanks to powder coating    Secure hold for TRAX, AERO and NANUK side cases and SysBag 15 and SysBag 30 with adapter plate    Adapter kits for attaching cases from Givi/Kappa, Krauser and Shad are also availableIncluded in delivery    2 x PRO Side carrier    Mounting instructions    Mounting materialDetails    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 6,5 kg / appr. 14.3 lb    Width built onto motorcycle: 57,0 cm / 22.4 inNote    Adapter kits are required for aluminum cases from SW-MOTECH and other manufacturers, NANUK and AERO ABS side cases and SysBag 15 or SysBag 30 with adapter plates.

Virtually indestructible Nylon 6 Platform, lighter than alloy and without fatigue issues machined with optional attachment points enabling you to set-up the bike to suit your adventure.     10mm Nylon-6 construction    CNC machined    Includes fitting kit for SW-Motech EVO or PRO pannier frame    Universal design, fits left or right side    Price is per single platformAllows mounting a single    OS-32 or OS-22 Soft Pannier or a single 1.75 Rotopax™ fuel or water container    OS-6 or OS-12 Adventure Pack with single or double 1 gallon Rotopax™ fuel/water containersMeasurements: 390(w) x 300(h) x 10(d)mm15.3"(w) x 11.8"(h) x 0.3"(d)Total Weight: T1050g  / 37 oz

Following on from SW-Motech's Quick-Lock side carriers, is the new Pro Side Carrier. Still removable, but even more robust. Made from 2.5 mm strong steel, the carriers mount even closer to the bike.  And the functional drill holes anable mounting of RotopaX cells (adapter available separetly) and other acceccories.     Fully removable, with newly developed, more robust quick-release fasteners    Optional anti-theft protection available    For permanent mounting, quick-release fasteners can be replaced with optional hard bolt kit    Suitable for TraX, SysBags, GIVI/Kappa, Krauser, Hepco & Becker and Shad cases with use of appropriate fitting kit, which can be purchased separately    Black powder coated surfacePlease Note:      The recommended set-up for TraX aluminum cases is: 45 Litres left and 37 Litres right. A different combination makes the set-up look unbalanced    The rear seat should only be used in the forward position or damage to the seat may occur Included:    PRO Side Carrier    Mounting Equipment    Mounting instructionsOptional: Anti Theft Device: We recommend you protect your side carriers from theft with the anti theft device, which locks the frames to you bike.Bolt Adapter Kit: The bolt adapter kit replaces the Quic-Lock adapters and allows for the SW-Motech Side Carriers to be mounted "permanently" to the bike, which adds strength and rigidity. Recommended for rough off-road riding.Tool Tube: Why not add this tool tube for safe storage of your spares and tools while you are on the road. It's made from robust plastic and is fitted with a rubber sealing inside the screw cap. Mounts to the inside of your side carrier.    Outer Dimensions: 30.5cm length (34cm length incl. mounting bracket) x 10cm diameter (11cm inclduing mounting bracket)    Inner Demensions: 30cm length x 8cm diameter

Following on from SW-Motech's Quick-Lock side carriers, is the new Pro Side Carrier. Still removable, but even more robust. Made from 2.5 mm strong steel, the carriers mount even closer to the bike.  And the functional drill holes anable mounting of RotopaX cells (adapter available separetly) and other acceccories.     Fully removable, with newly developed, more robust quick-release fasteners    Optional anti-theft protection available    For permanent mounting, quick-release fasteners can be replaced with optional hard bolt kit    Suitable for TraX, SysBags, GIVI/Kappa, Krauser, Hepco & Becker and Shad cases with use of appropriate fitting kit, which can be purchased separately    Black powder coated surfacePlease Note:      The recommended set-up for TraX aluminum cases is: 45 Litres left and 37 Litres right. A different combination makes the set-up look unbalanced    The rear seat should only be used in the forward position or damage to the seat may occur Included:    PRO Side Carrier    Mounting Equipment    Mounting instructionsOptional: Anti Theft Device: We recommend you protect your side carriers from theft with the anti theft device, which locks the frames to you bike.Bolt Adapter Kit: The bolt adapter kit replaces the Quic-Lock adapters and allows for the SW-Motech Side Carriers to be mounted "permanently" to the bike, which adds strength and rigidity. Recommended for rough off-road riding.Tool Tube: Why not add this tool tube for safe storage of your spares and tools while you are on the road. It's made from robust plastic and is fitted with a rubber sealing inside the screw cap. Mounts to the inside of your side carrier.    Outer Dimensions: 30.5cm length (34cm length incl. mounting bracket) x 10cm diameter (11cm inclduing mounting bracket)    Inner Demensions: 30cm length x 8cm diameter

Even more robust and ready for adventure - but still removable: with the introduction of the first removable carrier for motorcycle cases, we've made our mark on the accessories market, the PRO side carrier is the new generation. Offroad fans will be impressed. The bike-specific PRO side carrier made of 2.5 mm-thick steel is extremely durable. The PRO side carrier offers side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser and Shad as well as the Sysbag 15 and Sysbag 30 a secure fit - the matching adapter kits are sold separately. The PRO side carrier's numerous functional drill holes enable the mounting of RotopaX, Kriega OS-Platform  canisters and other accessories.We continue to use our trusted and popular QUICK-LOCK fasteners, which were also revised during redevelopment. As usual, the quick-release fasteners can be loosened by a quarter turn with a flat-head screwdriver or our multitool. The carrier can be removed completely in no time and all that remains on the bike are unimposing attachments. For permanently mounting the PRO side carrier on your bike, we now offer a redesigned quick-release fastener. A special mounting kit is no longer required, but the PRO side carrier can now be screwed tightly with cheaper, standard parts (M8). An appropriate screw kit (M8) is available separately from us.    Extremely durable due to its optimized shape and 2.5 mm thick steel    Perfect fit, designed to fit close to the bike    Fully removable with newly developed, even more robust quick-release fasteners    Optional anti-theft protection available    For permanent mounting, quick-release fasteners can be replaced with standard parts (M8)    Numerous functional bores, compatible with the RotopaX system among others    Simple mounting on original mounting points    Powerful corrosion protection thanks to powder coating    Secure hold for TRAX, AERO and NANUK side cases and SysBag 15 and SysBag 30 with adapter plate    Adapter kits for attaching cases from Givi/Kappa, Krauser and Shad are also availableIncluded in delivery    2 x PRO Side carrier    Mounting instructions    Mounting materialDetails    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 6,5 kg / appr. 14.3 lb    Width built onto motorcycle: 57,0 cm / 22.4 inNote    Adapter kits are required for aluminum cases from SW-MOTECH and other manufacturers, NANUK and AERO ABS side cases and SysBag 15 or SysBag 30 with adapter plates.

These side carrier adapters allow for moutning of SW-Motech alu cases to BMW OEM side carriers. No additional fitting kit needed. Included:    Adapter Kit (pair)    Mounting Equipment    Mounting instructionsDetails    Total Weight: appr. 2,2 kg / appr. 4.8 lb Please Note: Exclusively for the original BMW side carrier of the R 1200 GS LC Adventure as of year of construction 2016, R 1250 GS Adventure as of year of construction 2018 as well as F 850 GS Adventure as of year of construction 2018.

    Side carriers mount and demount within seconds     Suitable for TraX, GIVI/Kappa, Krauser, Hepco & Becker and Shad cases with use of appropriate fitting kit, which can be purchased separately.    Made of oval tube    Frame position is close to the bike    Black powder coated surface    Overall width of side carriers (without cases): 510 mmIncluded:    QUICK-LOCK EVO Side Carrier    Mounting Equipment    Mounting instructionsPlease Note: The recommended set-up for TraX aluminum cases is: 45 Litres right and 37 Litres left. A different combination makes the set-up look unbalanced. Optional:     Anti Theft Device: We recommend you protect your side carriers from theft with the anti theft device, which locks the frames to your bike.    Side Carrier Plugs: Cover the holes of your side carrier brackets, when the actual frames are not mounted. They provide a nicer look and better protection against rust on the cam locks.    Tool Tube: Why not add this tool tube for safe storage of your spares and tools while you are on the road. It's made from robust plastic and is fitted with a rubber sealing inside screw cap. Mounts to the inside of your side carrier.    Bolt Adapter: The bolt adapter kit replaces the Quick-Lock adapters, and allows for the SW-Motech side carriers to be mounted "permanently" to the bike, which adds strength and rigidity. Recommended for rough off-road riding.