Crash bars by SW-MOTECH provide the necessary extra safety for tank, fairing and components. Designed specifically for these types of bikes, these accessories fit seamlessly with the lines of the vehicle and offer optimal cornering clearance. Bike-specific mounting systems enable reliable, easy installation onto original attachment points.    Constructed of robust steel with a 22 mm pipe diameter.    Weather and corrosion resistant powder coating in black.    Reliable protection for important components    Highly stable construction appropriate for the peg length of the motorcycle    Model-specific development guarantees precise fit and reliable frame linkage    Optimized lean angle guaranteed    Simple mounting by screwing on factory-made mounting points on the frameIncluded in delivery    2 x Crash bar    Mounting instructions    Mounting materialDetails    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 6,0 kg / appr. 13.1 lbOptional Extra:Light Mounts for Crash Bars: Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm

    Reliable protection of important motorcycle parts    Strong frame connection    Black powder-coated    Suits the appearance of the motorcycle    Tube diameter 27 mmIncluded    2 Crash Bars    Mounting Equipment    Mounting InstructionsDetails    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 3,8 kg / appr. 8.5 lbOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.490.10001 EVO Universal 12 W / luminous flux: 1050 LM

    Reliable protection of important motorcycle parts    Strong frame connection    Black powder-coated    Suits the appearance of the motorcycleIncluded    2 Crash Bars    Mounting Equipment    Mounting InstructionsDetails    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 4,3 kg / appr. 9.5 lbOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.490.10001 EVO Universal 12 W / luminous flux: 1050 LM

    Reliable protection of important motorcycle parts    Strong frame connection    Black powder-coated    Suits the appearance of the motorcycleIncluded    2 Crash Bars    Mounting Equipment    Mounting InstructionsDetails    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 3,6 kg / appr. 8.0 lbOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.490.10001 EVO Universal 12 W / luminous flux: 1050 LM

    Reliable protection of important motorcycle parts    Strong frame connection    Black powder-coated    Suits the appearance of the motorcycle    Tube diameter 27 mmIncluded    2 Crash Bars    Mounting Equipment    Mounting InstructionsDetails    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 2,4 kg / appr. 5.3 lbOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.490.10001 EVO Universal 12 W / luminous flux: 1050 LM

    Reliable protection of important motorcycle parts    Strong frame connection    Black powder-coated    Suits the appearance of the motorcycleIncluded    2 Crash Bars    Mounting Equipment    Mounting InstructionsDetails    Material: Steel    Surface: powder coated    Color: orange    Total Weight: appr. 3,8 kg / appr. 8.3 lbOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.490.10001 EVO Universal 12 W / luminous flux: 1050 LM

    Reliable protection of important motorcycle parts    Strong frame connection    Black powder-coated    Suits the appearance of the motorcycleIncluded    2 Crash Bars    Mounting Equipment    Mounting InstructionsDetails    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 6,4 kg / appr. 16.1 lbOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.490.10001 EVO Universal 12 W / luminous flux: 1050 LM

The robust stainless steel bar protects the motor and components from drop damage and scratches. The use of blasted and electropolished stainless steel offers an advantage over coated steel in that damage to the crash bar cannot lead to a loss in corrosion resistance.Crash bars by SW-MOTECH provide the necessary extra safety for tank, fairing and components. Designed specifically for these types of bikes, these accessories fit seamlessly with the lines of the vehicle and offer optimal cornering clearance. Bike-specific mounting systems enable reliable, easy installation onto original attachment points.    Construction completely made of weather- and corrosion-resistant stainless steel    High-quality look due to blasted and electropolished surface    Reliable protection for important components    Highly stable construction appropriate for the peg length of the motorcycle    Model-specific development guarantees precise fit and reliable frame linkage    Optimized lean angle guaranteed    Simple mounting by screwing on factory-made mounting points on the frameIncluded in delivery    2 x Crash bar    Mounting instructions    Mounting materialDetails:    Material: Stainless steel    Surface: electropolished    Color: silver    Total Weight: appr. 5,0 kg / appr. 11.0 lbOptional Extra:Light Mounts for Crash Bars: Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm

Constructed of heavy-duty mild steelDesigned to provide maximum protectionAll components are protected against corrosion by sandblasting and powdercoatingHigh-strength frame mounting points.Optical integration, and high-quality fit and finishTube diameter: 22 and 27 mmColour: BlackTotal Weight: appr. 6,0 kg / appr. 13.2 lbOptional Extra:Light Mounts for Crash Bars: NSW.00.004.13000/B Made for EVO Fog and High Beam Lights, but other manufacturers lights may fit as well. Suitable for crash bar diameter 22 - 28 mm.Fog lamps: NSW.00.490.10001 EVO Universal 12 W / luminous flux: 1050 LM

This engine guard has been specially developed for BMW models BMW F 750GS and F 850 GS.Additional protection against rocks and contact with the ground for the engine: the high-quality, aluminium alloy engine guard shows what it's capable of off the street, but provides extra safety and an individualized look on the streets, too. State-of-the-art production gives these bike-specific protectors a secure fit without affecting ground clearance. The installation on frame mounting points lends additional stability and allows for easy installation.    Reliable and easy installation on original attachment points, modifications to the motorcycle are not required    Bike-specific development for perfect fit    Mounting material included in delivery    Durable design made of high quality aluminum alloyIncluded in delivery   1 x Engine guard    Mounting instructions    Mounting materialDetails    Material: Aluminum    Surface: brushed    Color: silver    Total Weight: appr. 4,2 kg / appr. 9.2 lb

    Optimised to provide maximum protection for critical parts    Design intergrates with the styling of the CB 1000 R    Made from light weight, CNC-milled PA6-MO, which offers higher tensile strength and more impact and UV resistance than Delring    Easy to mount with included instructions    Slider pads are removable from mounts and worn pads can be removed easilyIncluded:    2 frame sliders    Mounting hardware    Mounting instructionsDetails:    Material: PA6 Ertalon / Aluminum    Surface: anodized    Color: black / silver    Total Weight: appr. 1,1 kg / appr. 2.4 lb

    Offers excellent underbody protection from stone chipping and collision    Made from aluminium    Manufactured with punch rivets    Powder coated  Details:    Material: Aluminum / Aluminum    Surface: powder coated / powder coated    Color: black / silver    Total Weight: appr. 2,0 kg / appr. 4.4 lbIncluded:    Engine Guard    Mounting Material    Mounting Instructions

Get all the protection for your GS in this one kit, crash bars, engine guard, swing arm sliders and KOBRA hand guards. You are ready for adventure when you install this kit to your bike.  Crash Bars    Black powder coated    Bike specific and therefore perfect fitment    Installation to OEM mounting points    Made from steel with a 27mm pipe diameterBash Plate    Protects unbody from rocks and collision    Silver underside made of 4mm aluminium and black side walls made from 2.5mm aluminium KOBRA Hand Guards    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plasticSwing Arm Sliders    Swing Arm Protection    Slider pads made from abrasion-resistant polyamide    Easy mounting to swing armIncluded:    Crash Bars    Engine Guard    Swing Arm Sliders    KOBRA hand guards, black    Mounting Equipment    Mounting Instructions

Get all the protection for your GS in this one kit, crash bars, engine guard, swing arm sliders and SW-Motech hand guards, compatible with ADVENTURE and SPORT hand protector shells. You are ready for adventure when you install this kit to your bike.  Crash Bars    Black powder coated    Bike specific and therefore perfect fitment    Installation to OEM mounting points    Made from steel with a 27mm pipe diameter    Total Weight: appr. 6,0 kg / appr. 13.1 lb Engine guard    Protects unbody from rocks and collision    Silver underside made of 4mm aluminium    Color: silver    Total Weight: appr. 4,5 kg / appr. 9.9 lb Handguard mounting kit    Includes sturdy backbone made of powder-coated aluminum     Steel vibration reducing handlebar end caps     Easy mounting on the handlebars due to construction designed for the specific bike     Compatible with ADVENTURE and SPORT hand protector shells     Protection for levers and hands    Material: Aluminum     Surface: powder coated     Color: black     Total Weight: appr. 1,3 kg / appr. 2.9 lb Note Only the aluminum backbones for the right and left sides plus mounting material are included in the delivery. The ADVENTURE and SPORT hand protector shells are available separately. Not compatible with KOBRA or BBSTORM hand protector shellsSwing Arm Sliders    Swing Arm Protection    Slider pads made from abrasion-resistant polyamide    Easy mounting to swing armIncluded:    Crash Bars    Engine Guard    Swing Arm Sliders    Handguard mounting kit, black    Mounting Equipment    Mounting Instructions    Total Weight: appr. 12,9 kg / appr. 28.5 lb

The Adventure set Protection includes all important protective components for the BMW G 310 GS.Ready for any adventure: The protective components of this adventure set provide you and your bike with an extra helping of protection in the case of a fall or off-road. The bike-specific protectors convince with their ideal fit. They can be mounted to original attachment points and blend seamlessly with the aesthetics of the motorcycle. Treat yourself and your bike to the best protection!With the Adventure set you save 8 % compared to the purchase of the individual items.Crash bar:    Constructed of robust steel with a 27 mm pipe diameter.    Weather and corrosion resistant powder coating in black.    Reliable protection for important components    Highly stable construction appropriate for the peg length of the motorcycle    Model-specific development guarantees precise fit and reliable frame linkage    Optimized lean angle guaranteed    Simple mounting by screwing on factory-made mounting points on the frame    Details    Material: Steel    Surface: powder coated    Color: black    Total Weight: appr. 3,7 kg / appr. 8.1 lbEngine guard:    Underbody protection from rock chips and collision    Reliable and easy installation on original attachment points, modifications to the motorcycle are not required    Bike-specific development for perfect fit    Mounting material included in delivery    Durable design made of high quality aluminum alloyDetails:    Material: Aluminum    Material strength: 0,30 cm / 0.12 in    Surface: brushed    Color: silver    Total Weight: appr. 2,0 kg / appr. 4.4 lbSlider sets for front axle:    Protection for the fork    Discreet slider pad made from abrasion-resistant polyamide    Robust core made of fiberglass-reinforced plastic (PA6 GF30)    High mechanical damping capacity due to TPE coating    Good sliding properties and emergency operating features    Matte black surface with polished bull logo in red    Easy mounting with axle thread and bike-specific spacers    Details    Material: PA6 Ertalon    Color: black    Total Weight: appr. 0,6 kg / appr. 1.2 lbSlider set for rear axle:    Swing arm protection    Discreet slider pad made from abrasion-resistant polyamide    Robust core made of fiberglass-reinforced plastic (PA6 GF30)    High mechanical damping capacity due to TPE coating    Good sliding properties and emergency operating features    Matte black surface with polished bull logo in red    Easy mounting with axle thread and bike-specific spacers    Details    Material: PA6 Ertalon    Color: black    Total Weight: appr. 0,5 kg / appr. 1.0 lbHandguard mounting kit:    Bike-specific mounting kit with aluminium brackets for particularly strong two-point attachment.    Compatible with KOBRA or BBSTORM handguard shells    Handle and hand protection    Easy installation of the handguard shells on the aluminum bars    Details    Material: Aluminum    Surface: powder coated    Color: black    Total Weight: appr. 1,3 kg / appr. 2.9 lb    Note    Only the aluminum bars for the right and left sides are included in delivery. KOBRA or BBSTORM handguard shells are sold separately.KOBRA Handguard shells    Handguard shells made from impact-resistant Moplen plastic    Simply screw on the handguards to the KOBRA mounting kits    Modern design fits seamlessly into the look of the motorcycle    Protection for levers and hands from weather and during off-road rides    Details    Material: Moplen    Color: black    Total Weight: appr. 0,3 kg / appr. 0.6 lb

Get all the protection for your Africa Twin in this one kit, crash bars, engine guard and KOBRA hand guards. You are ready for adventure when you install this kit to your bike. With the Adventure set you save 8 % compared to the purchase of the individual items.Crash Bars    Black powder coated    Bike specific and therefore perfect fitment    Installation to OEM mounting points    Weight: 7 kgBash Plate    Protects unbody and parts of manifold and exhaust and rocks and collision    To replace the original engine guard from Honda with a wall thickness of 2.5 millimeters    Wall thickness 4mm, lower area 5mm    Two cut outs at bottom allow access to oil drain plugs, which avoids having to remove bash plate for oil change    Side cut outs provide ventilation    Compatible with Honda side and stand and SW-Motech centre stand    Suitable for all CRF 1000L models, except DCT version with gear lever    Weight: 4.1 kg    Colour: Brushed silver KOBRA Hand Guards    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plasticIncluded:    Lower Crash Bars    Engine Guard, Aluminium    KOBRA hand guards    Mounting Equipment    Mounting Instructions

Get all the protection for your Africa Twin in this one kit, lower and upper crash bars, engine guard including extension for centre stand and KOBRA hand guards. You are ready for adventure when you install this kit to your bike. PLEASE NOTE: The skid plate extension in this kit will not fit to the Honda OEM centre stand.Crash Bars Lower    Made from steel    Black powder coated    Bike specific and therefore perfect fitment Installation to OEM mounting points    Weight: 7.2 KilosCrash Bars Upper    Made from steel    Fairing protection    Simple installation to OEM mounting points    Black powder coated    Weight: 3.1 KilosEngine Guard / Skid Plate    Protects unbody and parts of manifold and exhaust and rocks and collision    Made from aluminium    Wall thickness 4mm, lower area 5mm    Weight: 4.2 Kilos    Colour: Brushed silverEngine guard / Skid Plate Extension    Easy mounting to SW-Motech centre stand    Underbody protection    Made from 3mm aluminium    Colour: Silver    Weight: 0.3 KilosKOBRA Hand Guards    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastic Included:    Lower and upper Crash Bars, black    Engine Guard / Skid Plate    Engine Guard extension for centre stand    KOBRA hand guards, black    Mounting Equipment    Mounting Instructions

Get all the protection for your Africa Twin in this one kit, lower and upper crash bars, engine guard including extension for centre stand and KOBRA hand guards. You are ready for adventure when you install this kit to your bike. Please Note: The Engine Guard / Skid Plate extension, which is part of this kit, is NOT compatible with the Honda OEM centre stand.Crash Bars Lower    Made from steel    Black powder coated    Bike specific and therefore perfect fitment Installation to OEM mounting points    Weight: 8.0 KilosCrash Bars Upper    Made from steel    Fairing protection    Simple installation to OEM mounting points    Black powder coated    Weight: 3.2 KilosEngine Guard / Skid Plate    Protects unbody and parts of manifold and exhaust and rocks and collision    Made from aluminium    Wall thickness 4mm, lower area 5mm    Weight: 4.5 Kilos    Colour: Brushed silverEngine guard / Skid Plate Extension    Easy mounting to SW-Motech centre stand. Does NOT work with Honda OEM centre stand    Underbody protection    Made from 3mm aluminium    Colour: Silver    Weight: 0.4 KilosKOBRA Hand Guards    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastic Included:    Lower and upper Crash Bars, black    Engine Guard / Skid Plate    Engine Guard extension for centre stand    KOBRA hand guards, black    Mounting Equipment    Mounting Instructions

Get all the protection for your Tenere 700 in this one kit, lower and upper crash bars, engine guard, water pump guard, front axle sliders and KOBRA hand guards. You are ready for adventure when you install this kit to your bike. Crash Bars Lower    Made from steel    Black powder coated    Bike specific and therefore perfect fitment Installation to OEM mounting pointsCrash Bars Upper    Made from steel with a 22mm pipe diameter    Fairing protection    Simple installation to OEM mounting points    Black powder coatedEngine Guard / Skid Plate    Protects unbody and parts of manifold and exhaust and rocks and collision    Made from aluminium    Colour: Brushed silverWater Pump Protection    Effective protection for the water pump    Made from high-strength aluminium, CNC etched    Colour: BlackFront Axle Sliders    Front Axle protection    Slider pads made from abrasion-resistant polyamide    PA6 Ertalon    Colour: BlackKOBRA Hand Guards    Protection for levers and hands from weather and during off-road riding    Bike specific and therefore perfect fit    Using Barkbusters frames - black, powder coated    Hand guard shells made from impact-resistant Moplen plastic Included:    Lower and upper Crash Bars    Engine Guard / Skid Plate    Water Pump Guard    Front Axle Sliders    KOBRA hand guards    Mounting Equipment    Mounting Instructions

The handguard mounting kits include the aluminum frames and mounting hardware for attaching the handguards to the handlebars of the motorcycle. They can be combined with the matching plastic shells.    Two mounting points secure the full wrap around aluminium design    Heat treated aluminium backbone for added strenght and impact protection    Easy installationNote:     Plastic / Carbon Guards are sold separately and can be chosen from the drop down menu    For trail bikes, enduro bikes with conical handlebars    Complete mounting material (without shells)Included in delivery:    1 x Barkbusters Handguard mounting kit    Mounting instructions    Mounting materialDetails:    Material: Aluminum    Color: silver    Total Weight: appr. 1,1 kg / appr. 2.5 lbOptional Accessories VPS Plastic Guards Only:VPS-003-01-WH WhiteVPS-003-01-SL SilverVPS-003-01-RD  RedVPS-003-01-BK Black VPS-003-01-OR  Orange HONDA CRF1100L AFRICA TWIN - DCT ('20 on) HONDA CRF1100L AFRICA TWIN - non DCT ('20 on) HONDA CRF1100L AFRICA TWIN Adventure Sports - DCT ('20 on) HONDA CRF1100L AFRICA TWIN Adventure Sports - non DCT ('20 on)

Universal Barkbusters Hand Guard Kit for 22 mm handle bars (straight)    Fits straight 22 mm (7/8") handle bars    Two mounting points secure the full wrap around aluminium design    Heat treated aluminium backbone for added strenght and impact protection    Easy installationPlease Note:    Plastic / Carbon Guards are sold separately and can be chosen from the drop down menue    Please note additional fitting instructions for Kawasaki KLR 650 under DownloadsOptional Accessories VPS Plastic Guards Only:VPS-003-01-WH WhiteVPS-003-01-SL SilverVPS-003-01-RD  RedVPS-003-01-BK BlackVPS-003-01-OR  OrangeFits:Honda    XLV 750 Africa TwinKawasaki    KX 250    KX 250 F    KLX 300 R '21-    KX 450 F    KLE 500 Please Note: Handlebar end plug will need to be drilled and tapped to M8x1.25 mm thread    KLR 650Suzuki    DR 200 SE '15-    DRZ400 E / S / SM    DR 650 SEYamaha    TTR 250    WR 250 X    XT 660 / R

The handguard mounting kits include the aluminum frames and mounting hardware for attaching the handguards to the handlebars of the motorcycle. They can be combined with the matching plastic shells.    Fits Tapered handle bars    Two mounting points secure the full wrap around aluminium design    Heat treated aluminium backbone for added strenght and impact protection    Easy installationNote:     Please check notes under Product Application, as some bikes require an additional spacer and bolt, which can be selected from the Related Products Menu at the bottom of this page.    Plastic / Carbon Guards are sold separately and can be chosen from the drop down menu    For trail bikes, enduro bikes with conical handlebars    Complete mounting material (without shells)Included in delivery:    1 x Barkbusters Handguard mounting kit    Mounting instructions    Mounting materialDetails:    Material: Aluminum    Color: silver    Total Weight: appr. 0,9 kg / appr. 2.1 lbOptional Accessories VPS Plastic Guards Only:VPS-003-01-WH WhiteVPS-003-01-SL SilverVPS-003-01-RD  RedVPS-003-01-BK Black VPS-003-01-OR  OrangeFits: BMW    1200 HP2 Enduro '07-'09Husqvarna    Svartpilen 701 '18-    Vitpilen 701 '18-Kawasaki    KX 250    Versys 1000 '15-KTM    250, 300, 350, 450, 525, 630 EXC    350 SX-F    LC 4    690 Duke '11-    690 Enrudo / R    790 Adventure / R '19- Please Note: Requires product B-078 (bolt and spacer kit for extra brake clearance on the right side between clamp and backbone). Handlebars need to be set in, or rear of, standard centre position.    950-990 LC8 / Adventure '05-    1050 Adventure - Please Note: Requires product B-079 (bolt and spacer kit for extra brake clearance on the right side between clamp and backbone)    1190 Adventure / R - Please Note: Requires product B-079 (bolt and spacer kit for extra brake clearance on the right side between clamp and backbone)    1290 Super Adventure  - Please Note: Requires product B-079 (bolt and spacer kit for extra brake clearance on the right side between clamp and backbone)Suzuki   DRZ400 SM

SABRE single point mount (open ended) handguard. Designed for Motocross and Enduro bikes. Slim profile handlebar clamps for easy installation. Clamps manufactured from high grade aluminium with adjustable fit in 2 side positions. High impact resistant moulded plastic guards. Low profile guard provides minimalist design with venting for increased airflow. With top & bottom deflectors fitted, riders have the ultimate coverage from roost, trail debris and harsh environments. Extensive range of deflector colours matched to popular motorcycle brands. Complete set includes guards, top & bottom deflectors, plugs and all mounting hardware. Note: This Single Point Mount product is not designed for impact protection

Designed for strong and stormy wind conditions    Maximum protection    Made of flexible cloth fabric    Suitable for almost all motorcycles    Construction remains self-supporting in strong wind    No fluttering in the wind    Operation of the motorcycle is not affected    Bends flexibly around the windscreen and fairing at full steering lock    Mounting options: on the handlebar with handlebar end weights, for hollow handlebars or on existing aluminium backbonesIncluded in delivery    2 x Handguards    Mounting instructions    Mounting materialDetails    Color: black / grey    Total Weight: appr. 0,8 kg / appr. 1.8 lb